エルゴノミックチェアってなに？

エルゴノミックチェアは、人間工学に基づいた研究の結果から作られた最新のタスクチェアです。近年は特にコンピューターでの作業が増え、座りっぱなしの体勢で長時間仕事をする方も多いかと思います。そのため、腰痛や肩懲りを慢性的に抱えている人も少なくないでしょう。さらに痛みが酷くなると、集中力も欠け、生産性にも大きく影響してきます。

人間にとって、座っている姿勢というのはそもそも腰に負担がかかるものですが、それが間違った姿勢であると、その負担はさらに大きくなります。長時間に渡って座って作業をするのであれば、椅子は体への投資と考えて良いものをお選びいただくことをお勧めします。不要な疲れが溜まらず、作業効率すら変わって来ることでしょう。

Haworthのエルゴノミックチェア

Haworthのエルゴノミックチェアは、巨額なR&D費用をかけて独自に開発されています。安価なエルゴノミックチェアは市場にも出回っていますが、それらはHaworthのように独自に開発しているメーカーの商品をコピーして生産されているため、見た目は似ていても座り心地が全く違います。また単に様々な調節機能を持ったタスクチェアの事をエルゴノミックチェアと呼んでいるケースも多く、その座り心地には雲泥の差があります。特に長時間に渡って座っていただくとその違いは歴然としています。

安価な椅子を数年毎に買い換える方もいらっしゃるかもしれませんが、環境に優しい行為ではありません。良い物を大切に長く使って行くのが今の時代のあり方ではないでしょうか？Haworthは、環境の観点からも素材の無駄ゼロや素材の再利用を導入した商品作りにも取り組んでいます。

Haworthのエルゴノミックチェアは、一脚からご購入いただけますので、コーポレートオフィスのみならず、ホームオフィスにもお勧めです！弊社にてサンプルもご用意しておりますので、座り心地をお試しください。

	Fern	Zody	Very	Soji

Bleach cleanability	Partially – with faux leather jacket and seat	Partially – with faux leather back jacket and seat	Partially – with faux leather back jacket and seat	Fully – with faux leather back, inside back and seat
Seat height-adjustment standard? × Features: Pneumatic seat height adjustment. Seat height adjusts in specified range in standard and low-position models. Benefits: Seat height adjustment is important in setting the proper hand position and allowing for proper sitting eye height as well. Ensures the comfort of the lower limbs by avoiding pressure on the underside of the thigh caused by a seat pan that is too high, or decreased thigh-to-torso angle if the seat pan is too low. Accommodates for users between approximately 4′11″(1499mm) and 6′3″(1905mm) tall to provide good leg circulation.	16.5″ – 21.5″	16″ – 21″	16″ – 21″	16.4″ – 21″
Seat height-adjustment low-range	15″ – 17.5″	14″ – 17″	14″ – 17″	14.75″ – 17.5″
Back material options	Mesh, digital knit, faux leather. Edgeless back design	Mesh, digital knit, back jacket in fabric, leather & faux leather	Mesh, digital knit, back jacket in fabric, leather & faux leather	Knitted mesh
Thoracic back support ? × Features: Total back support, providing pelvic, to lumbar to thoracic support (upper back). Optional height adjustable lumbar available in 4″ (102mm) range. Asymmetrical Lumbar Adjustment adjusts heights in specified range; support level can be adjusted independently for right or left-hand side of the users’ body. Benefits: Lumbar adjustment maintains the natural curvature of the spine at the lower back and allows users to choose the support that feels right for them. Integrated passive pelvic support rotates the pelvis forward to maintain the natural spine shape.	Yes	No	No	No
Lumbar adjustment ? × Features: Total back support, providing pelvic, to lumbar to thoracic support (upper back). Optional height adjustable lumbar available in 4″ (102mm) range. Asymmetrical Lumbar Adjustment adjusts heights in specified range; support level can be adjusted independently for right or left-hand side of the users’ body. Benefits: Lumbar adjustment maintains the natural curvature of the spine at the lower back and allows users to choose the support that feels right for them. Integrated passive pelvic support rotates the pelvis forward to maintain the natural spine shape.	Height-adjustable in 4″ range & asymmetric	Height adjustable in 4″ range	Height-adjustable and asymmetric	Height adjustable
Balanced 3-point tilt ? × Features: Balanced 3-point tilt mechanism. Back reclines in specified range from the upright position. Seat pan moves downward in specified range from the initial position. Benefits: Comfortable relaxed posture. Recline allows for the opening of the user’s chest cavity providing good airflow to promote alertness. Users’ feet remain flat on the floor.	Yes – Back reclines 24° from the upright position. Seat pan moves downward 5° from the initial position.	Yes – Back reclines 24° from the upright position. Seat pan moves downward 3° from the initial position.	Yes – Back reclines 20° from the upright position. Seat pan moves downward 3° from the initial position.	Yes – Back reclines 23° from the upright position.
Tilt tension control ? × Features: Regulates the amount of resistance felt when leaning back in the chair and the effort required to recline the chair backwards. Benefits: Personalized support to accommodate users of different body types and different work styles.	Yes	Yes	Yes	Yes
Back stop ? × Features: Optional Back Stop stops in specified positions. Benefits: Allows users the choice of selecting an upright position or limiting the amount of recline while performing different tasks.	Yes -in 5 positions – upright and every 7° of back angle.	Yes – in 6 positions – upright and every 4° backward.	Yes – Single position	Yes – Single position
Head rest available	Yes	Yes	Yes	No
Seat depth adjustment ? × Features: Optional seat depth adjustment in the specified range. Benefits: • Supports the thighs, allows users to rest against the seat back for back support, and avoids pressure on the back of the knees of small to tall users.	Yes in 3″ (76mm) range	Yes in 3″ (76mm) range	Yes in 3″ (76mm) range	Yes in 2.5″ (64mm) range
Forward tilt ? × Features: Optional forward tilt allows seat pan to move downward 5° from the initial position. Benefits: Allows user the opportunity to vary their posture throughout the day.	Yes	Yes	Yes	Yes
4D, height-adjustable arm, fixed arm available ? × Features: • Optional 4D arm adjusts in 4 ways: -Height adjustment in specified range -Side-to-side arm cap adjustment in specified range -Front-to back adjustment 3.5″ range (89mm) -Pivoting in specified range . Seat height adjusts in specified range in standard and low-position models. Benefits: Height adjustment offers users varying elbow rest heights so that users avoid lifting their shoulders or leaning sideways to get arm support. Front-to-back adjustment adjusts the armrest length, which is important because it allows users to get close to the worksurface while maintaining the effective use of the backrest. Side-to-side adjustment ensures a comfortable resting position for the arms with proper support of the forearm while allowing for easy entry/exit of the chair. Pivoting provides proper support of the forearm when performing tasks involving keying and mousing.	Yes – Height adjustment in 4.8″ (122mm) range, Pivoting-40°in/40 ° out , Side-to-side armcap adjustment in 7.5″ (191mm) range each side.	Yes – Height adjustment in 4.8″ (122mm) range, Pivoting-40°in/40 ° out , Side-to-side armcap adjustment in 7.5″ (191mm) range each side.	Yes – Height adjustment in 4″ (102mm) range, Pivoting-20°in/20 ° out , Side-to-side armcap adjustment in 1.5″ (38mm) range each side.	Yes – Height adjustment in 4″ (102mm) range, Pivoting-20°in/20 ° out , Side-to-side armcap adjustment in 1.5″ (38mm) range each side.
Lumbar adjustment	Height adjustable in 4″ (102mm) range	Height-adjustable in 4″ (102mm) range & asymmetric	Height-adjustable in 4″ (102mm) range & asymmetric	Height adjustable in 3.5″ (89mm) range

エルゴノミックチェアってなに？

Haworthのエルゴノミックチェア

Daizu, Inc.

Daizu, Inc.

Daizu Inc.